# Allow OpenVPN
iptables -A INPUT -p udp -m state --state NEW -m udp --dport 1194 -j ACCEPT
iptables -A FORWARD -s 192.168.88.0/24 -j ACCEPT
iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
# iptables -t nat -A POSTROUTING -s 192.168.88.0/24 -o venet0:0 -j MASQUERADE
# in OpenVZ/VServers you may need the following instead the lane above
iptables -t nat -A POSTROUTING -s 192.168.88.0/24 -j SNAT --to-source 22.214.171.124
Let say that you have OES11 machine with NSS volume and you would like to export this volume to Linux machine for sharing data.
To exporting and NSS Volume from an OES11 machine to a Linux machine, add the following to /etc/export on OES11 machine:
root# cat /etc/export
To mount NSS volume from an OES11 machine into a Linux machine, add the following to /etc/fstab on Linux machine:
root# cat /etc/fstab
oes11:/media/nss/DATA/Shared/XXHR/BNMDEV1 /share/Shared/XXHR/BNMDEV1 nfs defaults 0 0
to verity that everything is okay type mount command on a Linux machine, and you should see something like this:
OES11:/media/nss/DATA/Shared/XXHR/BNMDEV1 on /share/Shared/XXHR/BNMDEV1 type nfs (rw,addr=172.16.12.12)
That limit is a maximum of 64 characters (octets) in the “local part” (before the “@”) and a maximum of 255 characters (octets) in the domain part (after the “@”) for a total length of 320 characters. Systems that handle email should be prepared to process addresses which are that long, even though they are rarely encountered.
For more information see: https://www.rfc-editor.org/rfc/rfc3696.txt
[Tue May 05 10:01:46.317409 2015] [authz_core:error] [pid 5837] [client 126.96.36.199:32407] AH01630: client denied by server configuration: /var/lib/roundcube/
You don’t have permission to access / on this server.
To enable roundcube on Debian 8 after an upgrade add the following “Require all granted” to a virtual host configuration file:
Allow from all
Require all granted
The system is responding to a keyboard, but the booting process does not go forward.
Only ctrl+alt+del is working fine. To make it work I had to reboot with runlevel 1 and delete this one:
After that system is booting without problem.
After the upgrade Debian 7 to Debian 8 on OpenVZ platform on OVH the OpenVPN service stopped working. The problem was that the “TUN” device was missing, so the command below will temporary fix this problem.
root# mkdir -p /dev/net
root# mknod /dev/net/tun c 10 200
root# chmod 600 /dev/net/tun
Also you can add this to a script at start up.